Introduction
Introduction to the AXIS 3D printer build manual. Thank you for purchasing the AXIS 3D printer! Before starting any assembly we're going to go through the tools you will need and we'll also make sure that you have everything and that nothing from the kit is missing or broken.
Moderate3 steps
Step 1 You Will Need
- Note: The kit includes a set of allen keys but to complete the build you will also need:
- Scissors, lighter, pliers, phillips head screwdriver, small flat head screw driver and a tape measure.
- Caution: If you have not ordered the FlexPlate upgrade, you will also need a roll of blue painters/masking tape as a surface to print onto.
Loading comments…
Step 2 Support
- If you get stuck at any point and need help with the assembly or printing something, feel free to post in the official forum.
- Downloadable resources can be found here.
- If you're missing a part or have received a faulty/broken one, please use this form here to order a replacement.
- Want to get in touch? Drop us an email at info@makertech3d.com
Loading comments…
Step 3 Upgrades and Extra Parts
Loading comments…