# crowsnest.conf
#### crowsnest.conf #### This is the default config after installation. #### It is also used as the default config in MainsailOS. #### For details on how to configure this to your needs, see: #### https://github.com/mainsail-crew/crowsnest/blob/master/README.md
##################################################################### #### ##### #### Information about ports and according URL's ##### #### ##### ##################################################################### #### ##### #### Port 8080 equals /webcam/?action=[stream/snapshot] ##### #### Port 8081 equals /webcam2/?action=[stream/snapshot] ##### #### Port 8082 equals /webcam3/?action=[stream/snapshot] ##### #### Port 8083 equals /webcam4/?action=[stream/snapshot] ##### #### ##### #### Note: These ports are default for most Mainsail ##### #### installations. Using any other port would involve ##### #### changing the proxy configuration or using URLs ##### #### with the specific port like ##### #### http://<ip>:<port>/?action=[stream/snapshot] ##### #### ##### ##########
#### http://<ip>:<port>/?action=[stream/snapshot] ##### #### ##### ##################################################################### #### RTSP Stream URL: ( if enabled and supported ) ##### #### rtsp://<ip>:<rtsp_port>/stream.h264 ##### #####################################################################
[crowsnest] log_path: /home/pi/printer_data/logs/crowsnest.log log_level: verbose # Valid Options are quiet/verbose/debug delete_log: false # Deletes log on every restart, if set to true no_proxy: false # If set to true, no reverse proxy is required. Only change this, if you know what you are doing.
[cam 1] mode: ustreamer # ustreamer - Provides MJPG and snapshots. (All devices) # camera-streamer - Provides WebRTC, MJPG and snapshots. (only RPiOS + RPi 0/1/2/3/4) enable_rtsp: false # If camera-streamer is used, this also enables usage of an RTSP server rtsp_port: 8554 # Set different ports for each device! port: 8080 # HTTP/MJPG stream/snapshot port device: /dev/video0 # See log for available devices resolution: 2048x1536 # <width>x<height> format max_fps: 15 # If hardware supports it, it will be forced, otherwise ignored/coerced. #custom_flags: # You can run the stream services with custom flags. #v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see log for your camera capabilities.